Emerson 1C31150G02 PLC 可编程控制模块

1C31150G02 采用性能无速度传感器矢量控制技术，高效变频节能，节电率可高达50%；紧密结合空压机的运行特性，专用一体化结构设计，彻底打破传统“通用变频器+ 专用控制器”的控制模式。

1C31150G02 Adopting vector control technology without speed sensor, high efficiency frequency conversion and energy saving, the power saving rate can be as high as 50%; closely combined with the operating characteristics of the air compressor, special integrated structure design, completely breaking the traditional "general inverter + special controller" control mode.

1C31150G02 矢量控制稳速精度0.2%，快速响应实际压力变化，闭环恒压供气精度可达±0.01MPa，高启动转矩完全支持空压机满压带载启动。超强的过载能力，更宽的调速范围，充分满足空气系统的临时高负荷要求。

1C31150G02 Vector control steady speed accuracy of 0.2%, fast response to actual pressure changes, closed-loop constant pressure air supply accuracy of up to ±0.01MPa, high starting torque fully supports the start of the air compressor at full pressure with load. Ultra-strong overload capacity and wider speed regulation range fully meet the temporary high load requirement of air system.

1C31150G02 提供强大的全方位软硬件保护，保证空压机系统的可靠性和稳定性，启动和运转平稳，对电网无冲击，设备损耗低，寿命长，噪音低。

1C31150G02 Provide powerful all-round software and hardware protection to ensure the reliability and stability of the air compressor system, smooth start-up and operation, no impact on the power grid, low equipment loss, long service life and low noise.