Kollmorgen MMCD-SD-3.0-230-DN 晶体管控制器

避免烧坏触点,甚至毁坏控制器中的整个电路模块,以及避免充满电的电容器造成人危险至关重要。电容器中的残余电荷在超过120秒后，仍可能达到危险水平。关闭主电源后，仅当电压低于最小阈值水平时才连接或断开控制器。电源电压关闭后，观察控制器中的LED。短时间后，绿色LED 将熄灭，红色LED 将短暂亮起，现在您可以拔出或插入控制器。

 It is essential to avoid burning out contacts or even destroying the entire circuit module in the controller, as well as avoiding the danger to people posed by a fully charged capacitor. The residual charge in the capacitors may still reach dangerous levels after more than 120 seconds. After switching off the mains supply, connect or disconnect the controller only when the voltage is below the minimum threshold level. After the mains voltage has been switched off, observe the LEDs in the controller. after a short period of time the green LED will go out, the red LED will light up briefly and you can now unplug or plug in the controller.

对客户的一个关键优势是可以将现有设计中的电机替换成，在提升机器性能的同时，不增加机器尺寸。而对于新机器的设计，为客户提供与现有解决方案相比，更小的机器尺寸和占地面积的能力。

A key advantage of  for customers is the ability to replace motors in existing designs with , improving machine performance without increasing machine size. And for new machine designs, providing customers with the ability to reduce machine size and footprint compared to existing solutions.

可与现有伺服驱动器，以及即将推出的下一代伺服驱动器一起使用。2018年，科尔摩根在中国的应用机会，就帮助客户在不改变设备机械尺寸下，多提供50%的额定转矩，增加了45%的功率输出，达到机器运行效率提高27%的显著改善。

can be used with existing  servo drives, as well as upcoming next-generation servo drives. in 2018, Kollmorgen's application opportunities in China alone have helped customers deliver up to 50 per cent more rated torque without changing the mechanical dimensions of the machine, increasing power output by 45 per cent and achieving a significant improvement of 27 per cent in machine operating efficiency.