SCXI-1102 紧凑型 FieldPoint控制器

该设备配备1个以太网端口，带有10BaseT和100BaseTX以太网接口。一旦发送，控制器可以与另一个cFP-2020、FieldPointcFP-2020精明的控制器或不敏感的系统接口(如FP-16xx和FP-1000进行通信。

The unit is equipped with 1 Ethernet port with 10BaseT and 100BaseTX Ethernet interfaces. Once sent, the controller can communicate with another cFP-2020, FieldPointcFP-2020 savvy controller, or insensitive system interface (such as the FP-16xx and FP-1000.

用户系统上的每个cFP2020都需要11-30VDC控制电源。NI为大多数Compact FieldPoint应用指定了PS-5电源。PS-5提供24V、120W的电压，旨在安装在DIN导轨上。

Each cFP2020 on a user's system requires an 11-30VDC control power supply.NI specifies the PS-5 power supply for most Compact FieldPoint applications.The PS-5 provides 24V, 120W and is intended to be mounted on a DIN rail.

通过利用LabVIEW Real-Time，用户可以在其PC上开发功能强大的数据记录、控制和估计框架，并轻松地将其应用程序整合到NIcFP-2020智能控制器可实现可靠部署，无论是分布式还是独立部署，用户可以将LabVIEW的所有智能、高级控制和分析功能集成到适合工业环境的测量和最小包中。

By leveraging LabVIEW Real-Time, users can develop powerful data logging, control and estimation frameworks on their PCs and easily integrate their applications into the NIcFP-2020 intelligent controller can be reliably deployed, either distributed or stand-alone, and users can integrate all of LabVIEW's intelligent, advanced control and analytical functionality into measurement and minimal packages that are suitable for industrial environments.