Rextoth CLM014-N-N2-B-FW 伺服电机

用调速器来变更传动比,一般是用在功率比较小的减速器上，可是线性达不上,要手拉式调节。

Use the governor to change the transmission ratio, generally used in the smaller power reducer, but the linearity is not up to the hand-pull type adjustment.

修改控制板的基本参数来变更伺服电机的传动比，应用减速器互相连接来变更传动比。

Modify the basic parameters of the control board to change the ratio of the servo motor, and apply the reducer to connect with each other to change the ratio.

用相对定位指令或一定精准定位指令来变更(先给等同于100圈的低速档档单脉冲,运用单脉冲开展的m点,促成高度返回的指令)。

The relative positioning instruction or a certain precise positioning instruction is used to change (a single pulse equivalent to 100 revolutions is first given to the low-speed gear, and the m-point carried out by the single pulse is used to facilitate the instruction to return to the altitude).