NI CFP-CB-1 Compact FieldPoint控制器

通过利用LabVIEW Real-Time，用户可以在其PC上开发功能强大的数据记录、控制和估计框架，并轻松地将其应用程序整合到NIcFP-2020智能控制器可实现可靠部署，无论是分布式还是独立部署，用户可以将LabVIEW的所有智能、高级控制和分析功能集成到适合工业环境的测量和最小包中。

By leveraging LabVIEW Real-Time, users can develop powerful data logging, control and estimation frameworks on their PCs and easily integrate their applications into the NIcFP-2020 intelligent controller can be reliably deployed, either distributed or stand-alone, and users can integrate all of LabVIEW's intelligent, advanced control and analytical functionality into measurement and minimal packages that are suitable for industrial environments.

此外，cFP-2020界面自然地将I/O估计值分发到基于Windows的PC，该PC运行FieldPointExplorer、LabVIEW、LabView数据记录和监控模块(LabVIEW DSC)、LabWindows/CVI、Lookout或用于OLE过程控制的应用程序编程客户。(OPC)的用户的决定。此外，它还能与现有的传统框架或可编程逻辑控制器(PLC)框架有效协调。重要的是要记住NIcFP-2020支持LabVIEW实时8.5.1和以前的版本。

In addition, the cFP-2020 interface naturally distributes I/O estimates to a Windows-based PC running FieldPointExplorer, LabVIEW, LabView Data Logging and Supervision Module (LabVIEW DSC), LabWindows/CVI, Lookout, or an application programming client for OLE process Application Programming Client for OLE process control. (OPC) at the user's discretion. In addition, it coordinates effectively with existing legacy frameworks or programmable logic controller (PLC) frameworks. It is important to remember that the NIcFP-2020 supports LabVIEW Real-Time 8.5.1 and previous versions.

该设备配备1个以太网端口，带有10BaseT和100BaseTX以太网接口。一旦发送，控制器可以与另一个cFP-2020、FieldPointcFP-2020精明的控制器或不敏感的系统接口(如FP-16xx和FP-1000进行通信。

The unit is equipped with 1 Ethernet port with 10BaseT and 100BaseTX Ethernet interfaces. Once sent, the controller can communicate with another cFP-2020, FieldPointcFP-2020 savvy controller, or insensitive system interface (such as the FP-16xx and FP-1000.