Schneider 140AII33010 输入/输出模块 

140AII33010 当存在总线通信时，140AII33010会呈绿色提醒您，当检测到模块外部存在错误时，LED 会发出红色警报,当模块输出打开时，1...8为绿色,当指示通道断线时，1...8 为红色。

140AII33010 When there is a bus communication, 140AII33010 will be green to remind you, when there is an error detected outside the module, the LED will be red to warn you, when the module output is open, 1...8 is green, when the indication channel is disconnected, 1...8 is green, when the indication channel is disconnected, 1...8 is green. .8 is green, when the indication channel is disconnected, 1...8 is red. When the module output is on, 1.

140AII33010 该模块的输入范围为0...25 mA 0...20 mA 4...20 mA,分辨率为0...25 mA : 0...25,000 点0...20 mA:0...20,00点4...20 mA :0...16,000 点(默认)4...20 mA:0...4095点,通道之间没有隔离,它有8个输出字。所需的总线电流为550mA,最大功耗5.0W，可在线修改配置。它符合 UL 508、CSA 22.2-142、e、FM Class 1 Div.标准。2、ATEX 2/22 区认证。

The module 140AII33010 has an input range of 0... .25 mA 0... .20 mA 4... .20 mA, with a resolution of 0... .25 mA : 0... .25 mA : 0... .25,000 points 0... .20 mA: 0... .20,00 points 4... .20 mA :0... .16,000 points (default) 4.... .20 mA:0... .4095 points, there is no isolation between channels and it has 8 output words. The required bus current is 550 mA, the maximum power consumption is 5.0 W. The configuration can be modified online. It complies with UL 508, CSA 22.2-142, e, FM Class 1 Div. 2, ATEX Zone 2/22 certification.

Modicon 140AII33010 是施耐德电气制造的模拟量输出模块，它是用于离散和模拟I/O 模块的 Modicon Quantum ExoStruxure控制系列的一部分，可以使用UnityPro软件进行配置。

The Modicon 140AII33010 is an analogue output module manufactured by Schneider Electric as part of the Modicon Quantum ExoStruxure control family for discrete and analogue I/O modules that can be configured using UnityPro software.