Triconex 8312 电源模块

Triconex 8312 每个 Tricon 机箱都配有两个电源模块，其中一个，完全都能使 Tricon 在满负荷和额定温度下运行。电源模块位于机箱左侧，可将线路电源转换为直流电源。

Triconex 8312  Each Tricon chassis comes with two power supply modules, one of which, fully both enable the Tricon to operate at full load and rated temperatures. The power supply modules are located on the left side of the chassis and convert line power to DC power.

Triconex 8312 规格，Tricon 系统可安装在机架上，也可安装在面板上。机箱机柜，机柜可选择配备底座和脚轮，但必须留出足够的间隙，以便完全打开前后门。

Triconex 8312 Specifications, Tricon systems can be rack mounted or panel mounted. Chassis Cabinets, Cabinets may optionally be equipped with a base and casters, but must allow sufficient clearance to fully open the front and rear doors.

Triconex 8312 电源模块报警触点为：1.模块从系统中丢失系统2.硬件配置，与控制程序的逻辑配置冲突3.模块故障，主处理器检测到系统故障4.电源模块的主电源故障5.电源模块出现 "低电量6.电池电量不足 "或 "温度过高

Triconex 8312  Power module alarm contacts are: 1. module from the system lost system 2. hardware configuration, and the logic of the control program configuration conflict 3. module failure, the main processor detects a system failure 4. mains power supply failure of the power module 5. power module "low battery 6. low battery" or "high temperature