Triconex 8312C  高密度电源模块8312

8312C 电源模块报警触点为：1.模块从系统中丢失系统2.硬件配置，与控制程序的逻辑配置冲突3.模块故障，主处理器检测到系统故障

4.电源模块的主电源故障5.电源模块出现 "低电量6.电池电量不足 "或 "温度过高

8312C Power module alarm contacts are: 1. module from the system lost system 2. hardware configuration, and the logic of the control program configuration conflict 3. module failure, the main processor detects a system failure 4. mains power supply failure of the power module 5. power module "low battery 6. low battery" or "high temperature

8312C 每个 Tricon 机箱都配有两个电源模块，其中一个，完全都能使 Tricon 在满负荷和额定温度下运行。电源模块位于机箱左侧，可将线路电源转换为直流电源。

8312C Each Tricon chassis comes with two power supply modules, one of which, fully both enable the Tricon to operate at full load and rated temperatures. The power supply modules are located on the left side of the chassis and convert line power to DC power.

8312C 电源模块位于机箱左侧，可将线路电源转换为适合所有 Tricon模块，用于系统接地、输入电源和硬接线报警的接线端子，用于系统接地、输入电源和硬接线警报的端子排位于背板左下角。背板左下角。输入电源每个电源的额定功率，应至少为每个电源的额定功率应至少为 240 瓦。

8312C The power module is located on the left side of the chassis and converts line power to fit all TriconModules, Terminal Blocks for System Ground, Input Power, and Hardwired Alarms Terminal blocks for system ground, input power, and hardwired alarms are located in the lower left corner of the back panel.Lower left corner of the backplane. Input Power Each power supply should be rated for at least Each power supply should be rated for at least 240 watts.