5SHY3545L0014 IGCT可控硅主板

Short Description:

ABB 5SHY3545L0014 从成本上看,目前同等容量的IGCT售价约为压接式IGBT的1/2,而模块式IGBT价格相对较低。事实上,由于当前IGCT的应用不如IGBT广泛,使得市场价格偏高,如果实现更大规模的应用,IGCT成本还可以降低。...


产品详情

产品标签

5SHY3545L0014 IGCT可控硅主板

5SHY3545L0014 从成本上看,目前同等容量的IGCT售价约为压接式IGBT的1/2,而模块式IGBT价格相对较低。事实上,由于当前IGCT的应用不如IGBT广泛,使得市场价格偏高,如果实现更大规模的应用,IGCT成本还可以降低。

5SHY3545L0014 In terms of cost, the current selling price of an IGCT of the same capacity is about 1/2 that of a crimped IGBT, while the price of a modular IGBT is relatively low. In fact, due to the current IGCT is not as widely used as IGBT, making the market price is high, if the realisation of a larger scale of application, IGCT cost can also be reduced.

ABB 5SHY3545L0014 (2).png


5SHY3545L0014 总的来说,IGCT的开关频率IGCT是通过在门极可关断晶闸管(门极可关断晶闸管,GTO)中引入缓冲层、阳极透明发射极结构,并将门极驱动电路集成,从而使IGCT不仅具有大电流、高火灾电压、低通态压降,同时还具有较高的开关速度、高可靠性等优点。IGCT目前产品的最大可关断电流达到8kA。

5SHY3545L0014 IGCT is made by introducing buffer layer, anode transparent emitter structure in gate turn-off thyristor (gate turn-off thyristor, GTO) and integrating the gate drive circuit, so that IGCT not only has the advantages of high current, high fire voltage, low on-state voltage drop, but also has the advantages of high switching speed, high reliability, etc. The maximum turn-off current of current products of IGCT reaches 8kA.

ABB 5SHY3545L0014.png


5SHY3545L0014 相对于IGBT,IGCT具有非常高的浪涌电流承受速度,4英寸器件可耐受10ms的30kA以上的正弦暂态电流。从开关速度来看,IGCT的开通和关断均要慢于IGBT事实上,对于IGCT 5SHY40L4511和压接式IGBT 5SNA1300K450300,若考虑2800V/1300A的关断电压和电流,IGCT的关断电压约为5J,而IGBT约为6J,因此另外,IGCT在导通2kA电流时的通态电压降最低达到1.5V,而IGBT则为3.0V,因此IGCT通态损耗也略低。。但是,由于IGBT是电压源型器件,门极驱动功率远低于恒定IGCT。

5SHY3545L0014 Compared to IGBTs, IGCTs have very high inrush current withstand speeds, with 4-inch devices withstanding sinusoidal transient currents of 30kA or more for 10ms. In terms of switching speed, IGCT turn-on and turn-off are both slower than IGBTs In fact, for the IGCT 5SHY40L4511 and the crimped IGBT 5SNA1300K450300, if we consider the turn-off voltage and current of 2800V/1300A, the turn-off voltage of the IGCT is about 5J, while that of the IGBT is about 6J, so additionally the on-state voltage drop of the IGCT at a conductive The on-state voltage drop at a current of 2kA is as low as 1.5V compared to 3.0V for the IGBT, so the IGCT on-state loss is also slightly lower. However, since the IGBT is a voltage source type device, the gate drive power is much lower than the constant IGCT.


联系我们

留言


在这里写下您的信息并发送给我们

留言